Page Comparison

...

1. Choose Appointments. 
2. Select an appointment and choose Complete.
3. Select Inspections.
4. Select the Add Image Removed icon Add icon.
5. Select Job Safety Analysis from the list.
6. The top of the JSA displays the date, Appointment ID, Inspector name (you), and the customer/location.
7. Under General Information, enter the following:
   • Emergency Phone #
   • Location(s) of First Aid
   • Safety Shower/Eye Wash Location(s)
   • Description of Work Being Performed
8. Complete the Identify Potential Hazards section. When you identify that a task is a potential hazard, you are required to enter what makes the task a hazard and how you can mitigate or eliminate the hazard.
9. If there are any other Hazards, you can add these in the Additional Hazard Assessments section.
10. Under Review, you can indicate if the Location is Safe.
11. Under Signature, enter your name and then sign the device.
12. To save the JSA as In Progress, select the Save icon. This does not complete the JSA.
13. To complete the JSA, select the menu icon. Select Complete with a Report. (You can also Cancel the Inspection or Continue Editing.)
14. Select Yes to verify that you want to complete the JSA.
15. The Job Safety Analysis report displays. You can also access this report by selecting the Reports icon from the Service Call form.