...

1. Choose Microsoft Dynamics GP > Tools > Setup > Service Management > Lookup Setup > Technicians > Technicians.
2. Complete the following fields, as necessary.
   • Technician ID
     Unassigned is a default technician ID and cannot be deleted.
   • Inactive
     Mark this check box to inactivate the technician. Inactive technicians cannot be assigned to new service calls and will not appear on most lookup lists. They only display in Technician Setup and the Source Technician lookup in Technician Mass Reassignment (Microsoft Dynamics GP > Tools > Utilities > Service Management > Tech Reassignment). You can reactivate a technician at any time.
   • Employee ID or Vendor ID
     Link the technician to either an employee ID or a vendor ID. Select the appropriate radio button and enter the corresponding ID. If you have not yet set up the employee or vendor in Microsoft Dynamics GP, you can zoom on the Employee ID or Vendor ID field to do so.
   • MobileTech Password
     If you are a registered user of the MobileTech module, you can monitor two types of field technicians: those who use MobileTech communication and those who do not. Register each MobileTech technician by inserting a password - or leaving the password empty - and marking the MobileTech User check box.
   • Primary Skill Level
     When creating appointments, the system checks the technician's primary skill level against the skill level required to perform the task. You are still able to schedule the appointment if the skill levels do not match.
   • Technician Team
     Used with Schedule.
   • Extended Hours
     If you are using the Advanced Scheduling modules, enter the amount of time a technician can work beyond each daily shift. For example, if a technician is assigned to a 7 a.m. – 3 p.m. shift (8 hours) and has two hours of extended time, you can assign the technician to service call appointments for a total of 10 hours. The extended hours can occur at the beginning and/or end of the technician's shift. If an appointment's estimated time exceeds the technician's extended hours, you will receive a message. You can password protect scheduling a technician past the extended hours.
   • Refrigerant Certification #
     Enter the certification number required to work on refrigeration systems, as specified under Section 608 of the Clean Air Act.
   • Branch Name
     If you are using global filtering, enter branch information. The Affiliate, Region, and Branch fields fill in based on the branch name selected; these fields are not editable.  For information on assigning multiple branches, see Assigning technicians to multiple branches.
3. Additional setup options available via buttons in this window:
   • Skill Set - see Assigning skill sets to technicians.
   • Labor Plan - see Assigning labor plans to technicians.
   • Shifts - see Assigning shifts to technicians.
   • Activities - see Viewing technician activities.
   • Service Areas - see Assigning service areas to technicians.
   • Inventory Sites - This is used with MobileTech. This determines what inventory sites will be synchronized to the technician's device.  Typically each technician is assigned to a site that equates to their truck. 
4. Choose Save.

Anchor
servicemanagement_assigning_skil_322 servicemanagement_assigning_skil_322

Assigning skill sets to technicians

You can set up a detailed description of a technician's skills, which is useful when scheduling. The information can be viewed by zooming on the Technician ID field.

...

For skill level setup information, see Setting up skill levels.

Anchor
servicemanagement_assigning_labo_1105 servicemanagement_assigning_labo_1105

Assigning labor plans to technicians

You can forecast a technician's available monthly labor hours in the Technician Labor Plan window. This availability information is necessary when scheduling a technician throughout the year. In addition, this information is used with the Labor Loading module.

1. Choose Microsoft Dynamics GP > Tools > Setup > Service Management > Lookup Setup > Technicians > Technicians.
2. Select a technician and choose the Labor Plan button in the Technician Setup window.
3. Enter a Year or choose one using the lookup window.
4. Enter the estimated time you want this technician to spend in each category for each month:
   • Burden Hours are non-billable hours.
   • Billable Hours are hours for non-maintenance contract-related service calls.
   • MCC Hours are hours for available computer-generated maintenance contracts.
   • MC Hours are maintenance contract-related hours.
5. Choose Save to return to the Technician Setup window.

Anchor
servicemanagement_assigning_shif_6195 servicemanagement_assigning_shif_6195

Assigning shifts to technicians

Once shifts are set up, you can assign one or more shifts to a technician. You would use more than one shift if the technician's working schedule temporarily changes, for example, from days to nights. To be scheduled, the technician must be assigned to a shift.

...

For shift setup information, see Setting up technician shifts.

Anchor
servicemanagement_viewing_techni_8338 servicemanagement_viewing_techni_8338

Viewing technician activities

An activity is time not available for service calls, such as meetings, training, or vacation.

...

For activity ID setup information, see Setting up technician activity IDs.

Anchor
servicemanagement_assigning_serv_9529 servicemanagement_assigning_serv_9529

Assigning service areas to technicians

Service areas define customer locations classified by geographical area. The technician entered in the first line is considered the primary technician. The technician entered in the second line is considered the secondary technician.

1. Choose Microsoft Dynamics GP > Tools > Setup > Service Management > Lookup Setup > Technicians > Technicians.
2. Select a technician and choose the Service Area button.
3. The Service Area Setup window opens. See Setting up service areas for information about this window.

Anchor
servicemanagement_assigning_tech_8265 servicemanagement_assigning_tech_8265

Assigning technicians to multiple branches

You can assign a technician to multiple branches. This is handy for technicians that work in more than one area, and for dispatchers who need to schedule that work. In addition, you can designate a home branch for technicians. This branch would be used to schedule PTO, training and other miscellaneous activities if using activity scheduling. If Global Filtering is enabled, and a user has access to only one branch, he/she can still access, for example, all appointments for a technician on the Technician Board. However, that user cannot zoom on that appointment if it is for a branch to which he/she does not have access.

...

For branch setup information, see Setting up branches.