Anchor
servicemanagement_printing_and_p_7563 servicemanagement_printing_and_p_7563

Anchor
servicemanagement_printing_and_p_1599 servicemanagement_printing_and_p_1599

Printing

...

Invoices

Once all costs have been added to an invoice, you can print the invoice. Invoices can be printed individually or by batch. For information on batch printing invoices, see Batch printing invoices and credit memos.

1. Select Cards > Service Management > Service Manager.
2. Select a customer and select the History indicator.
3. Double-click a call.
4. Select Invoice.
5. Select Print and select an invoice format.
6. Select a print destination and select OK. There are eight modifiable invoice formats. The credit memo format is modifiable and is used when printing credit memos. The GST invoice format is used with GST.
   • Invoice 1
     Only cost fields with costs entered are shown.
   • Invoice 2
     This invoice is similar to the first format except the itemized costs are double-spaced.
   • Invoice 3
     The invoice description is printed below the "Description of Work Done" subtitle. If the Signature Multicurrency Management module is registered, invoice 3 is modified to print the originating amounts if your transaction is in the originating currency. If your transaction is in the functional currency, invoice 3 will print the functional amounts. See Multicurrency Management.
   • Invoice 4
     This is a two-page invoice. The invoice description is printed below the "Description" subtitle. If no cost was added for a cost category, $0.00 is listed. The second page lists the tax detail for each cost category, the total tax, and total invoice amount If the Signature Multicurrency Management module is registered, invoice 4 is modified to print the originating amounts if your transaction is in the originating currency. If your transaction is in the functional currency, invoice 4 will print the functional amounts. See Multicurrency Management.
   • Invoice 5
     The invoice description prints in the center of the invoice. Below the description are the cost totals without descriptions for equipment, material, labor, subcontractor, and other costs. If no cost was added for a cost category, $0.00 is listed for that category. The comments are double-spaced below the total sales tax and invoice total.
   • Invoice 6
     The invoice description prints in the center of the invoice. Below the description are the cost totals without descriptions for equipment, material, labor, subcontractor, and other costs. If no cost was added for a cost category, $0.00 is listed for that category. The comments are double-spaced below the total sales tax and invoice total.
   • Invoice 7
     This invoice format omits the individual cost totals and prints just the total sales tax and total invoice amounts.
   • Invoice 8
     This invoice style subtotals on cost codes. Labor also subtotals by job title and pay code.

Anchor
batch-printing batch-printing

Batch

...

Printing Invoices and Credit Memos

You can batch print service call invoices and credit memos through the Receivables Batch Entry window.

...

Anchor
servicemanagement_posting_invoic_1143 servicemanagement_posting_invoic_1143

Posting

...

Invoices

You can post the invoice from the Service Invoice window or from Microsoft Dynamics GP using series or master posting routines.

...

1. Re-open Service Invoice, clear the Batch ID field.
2. Close the window.
3. When prompted to save or delete the invoice, select Delete.
4. Re-open the window and the negative costs will display.

Anchor
servicemanagement_posting_invoic_6522 servicemanagement_posting_invoic_6522

Batch

...

Posting from Microsoft Dynamics GP

If you've saved your service invoice to a batch, then you can master or series post the invoice. Most likely you saved your cost transactions to batches as well. Payables are saved to a payables batch, inventory to a sales or transaction entry batch, and added costs to a general ledger batch.

...

If you marked Allow Posting Invoices For Only Actual Costs, the batch can be posted, however, only the actual costs will post. The unposted cost transactions will not post.

...

• Once the transactions and the invoice are posted, the call status changes to Close.
• Once an invoice is posted, the invoice can no longer be edited.

Creating

...

Multiple Invoices for One Service Call

If you have a need to create multiple invoices per service call, or you would like to be selective about which actual costs you are invoicing at what time, we recommend you use the Service Batch Invoicing window. For more information, see Service Batch Invoicing.

You only can edit an invoice from the Process Group Invoices window. However, you can view a saved or posted invoice from the Invoice Inquiry window.

...

• Service Batch Invoicing
  The invoice is viewed as display-only in the Invoice Inquiry window and cannot be edited.
• Service Invoice
  The invoice is opened in the Invoice Entry window and can be edited.

Anchor
servicemanagement_creating_an_in_8249 servicemanagement_creating_an_in_8249

Creating an

...

Invoice for a

...

Closed Service Call

Sometimes costs come in late or are overlooked, yet still need to be applied to a closed service call. You can create another invoice for a closed call.

...

You can post transactions in Microsoft Dynamics GP using two methods: transaction-level and batch-level posting. There are three types of batch-level posting: batch, series, and master posting. The posting process is the same for all three batch-level posting types: You select the batch or batches you want to post and select Post. Batch, series, and master posting differ only in the number of batches you can select for simultaneous posting.

Transaction-

...

Level Posting

Transaction-level posting allows you to enter and post transactions individually without ever having to create a batch. Accounting information is immediately up-to-date when you post using this method, because transactions must be posted or deleted immediately. They can't be saved or posted later.

Batch-

...

Level Posting

Batch

...

Posting

A batch is a group of transactions. Batch-level posting posts batches one at a time. Each batch can be posted from the Batch Entry window after all transactions in the batch have been entered and saved. Batches can be saved and posted later.

Series

...

Posting

Series posting allows you to post multiple batches in a specific Microsoft Dynamics GP series. In a setting where posting is more centralized, series posting might be used if some types of transactions require more frequent posting than others.

Master

...

Posting

Batches from any Microsoft Dynamics GP module can be posted using master posting. Master posting posts all marked batches, in all modules, no matter who marked them. Master posting allows you to post many series simultaneously.
Master posting works for all batches except those in Payroll. All other batches are posted immediately by selecting the Post button. Master posting assumes that you have checked and verified each work status cost as it posts costs in each marked batch. You may want to create a batch ID that is unique to service invoices to avoid accidentally posting other work status transactions.