Page Comparison

...

1. From the main navigation, choose Service Calls Image Removed > > select a service call and select More (or select an appointment > Select More > choose the Service Call hyperlink).
2. In the Service Call window, choose the Tasks Image Removedtab tab. 
3. A list of the tasks that you're scheduled to complete for the service call is displayed. You can filter the tasks that display by choosing from the following:
   • All Tasks (hierarchy) – View all tasks for a service call by sublocation, then equipment, and then the task list. This is the default view.
   • Open Tasks (hierarchy) – View only open tasks for a service call by sublocation, then equipment, and then the task list.
   • All Tasks (no hierarchy) – View all tasks for a service call by task code. No equipment, sublocation, or task list information is displayed.

4. If you want to filter the task list more, you can select a Sublocation for the task list and/or Equipment. 

   Note
   If you selected a Sublocation, only the equipment available for the sublocation are listed in the drop-down. If you did not choose a specific sublocation, all the equipment assigned to the task list will display in the drop-down.

   
   

5. You can select the drop-down beneath the filters to choose to display tasks based on the Task Status by selection:
   • Show All - Displays all tasks, although if you have filtered to show Open Tasks at the top of the page, only the open tasks display.
   • Open Tasks - Displays only tasks with an Open status.
   • Complete Tasks - Displays only tasks with a Closed status.

...

You can complete a group of tasks or an individual task.

Working with a Group of Tasks

...

1. Select the task list, sublocation, and/or equipment above the tasks and choose the Complete Image Removedicon. 
2. When a message appears to confirm the completion of all tasks under the selected entity, choose Yes. 
3. The status of the tasks changes to Complete. When you complete a task, all subtasks for the task are also completed.

...

1. Select the task list, sublocation, and/or equipment above the tasks and choose the Reopen Image Removed iconicon.
2. When a message appears to confirm that all tasks will be reopened under the selected entity, choose Yes. 

3. The status of the tasks changes to the default task status. 

   Note
   If you previously chose More to view or change information for a task and you selected the status for that task, the status of the task doesn't change if tasks are completed or reopened by using the sublocation, equipment, or task list.

   
   

4. When you finish all the tasks for a service call, choose the Complete Image Removedicon. The word COMPLETE is displayed next to each task to indicate the task is completed.

...

1. Select the task list, sublocation, and/or equipment above the tasks. The information that is displayed for the task depends on the filters that you selected.
2. Select an individual task from the list of tasks, select Complete or choose More to update information for the task, such as the status or completion date.
3. Use the Previous < and Next > buttons to work with other tasks.
4. When you finish all the tasks for a service call, choose the Complete Image Removedicon. The word COMPLETE is displayed next to each task to indicate the task is completed.

...

1. Select the task list, sublocation, and/or equipment above the tasks. The information that is displayed for the task depends on the filters that you selected.
2. Select an individual task from the list of tasks, select Complete or choose More to update information for the task, such as the status or completion date.
3. Use the Previous < and Next > buttons to work with other tasks.
4. When you finish all the tasks for a service call, choose the Complete Image Removedicon. The word COMPLETE is displayed next to each task to indicate the task is completed.

Working with Subtasks

1. Select a task.
2. Choose More, and then choose Subtasks. 
3. Beneath the Subtasks bar, you can filter the subtasks by selecting Show All, Open Tasks, or Complete Tasks from the drop-down.
4. To complete all the displayed subtasks, choose the Complete button. You can also reopen all the displayed Closed subtasks by choosing the Reopen button.
5. To complete an individual subtask, select a subtask, and depending on the status of the subtask, you can choose Complete, Reopen, or More. If you choose More, you can change the completion date, if needed. You can also change the status of the subtask.
6. When you finish changing the subtask information, close the pane or use the Previous < and Next > buttons to work with other tasks.
7. When you finish all the tasks for a service call, choose the Complete Image Removedicon. The word COMPLETE is displayed next to each task to indicate the task is completed.