Resco Inspections is designed to perform the entire inspection process and the ability to generate a report directly on a device, immediately after completing an inspection. You can customize the report directly in the Questionnaire Designer or Report Designer. For information about how to use Resco's Questionnaire Designer and Report Designer, go to https://docs.resco.net/wiki/Mobile_reports_for_Resco_Inspections.

Resco Inspections is enabled in the MobileTech with Inspections project, however you will need to assign the Inspector Role to any technicians who will be using Inspections (and the optional Job Safety Analysis). If you will be using the Job Safety Analysis, you will need to complete the steps to enable found here: Enable Job Safety Analysis (optional). Resco has a 30-day trial that you can use to evaluate Resco Inspections. After the trial, to purchase the Resco Inspections module for MobileTech, contact your WennSoft Customer Success Manager. If you decide you do not want to purchase Resco Inspections, you will need to Disable Resco Inspections.

The Inspection Report filename is limited to 51 characters (this includes any appended date or timestamp information and the MIME type ‘.pdf’). If the Inspection Report name exceeds 51 characters, the Inspection Report annotation entity fails with the sync error: String or binary data would be truncated.

We've also included Resco's COVID-19 Health Check and Face Mask Check AI Model questionnaire templates. See Import Templates to Resco Inspections (optional) for information on importing the templates to Resco Cloud and configuring the AI Image Recognition in Woodford.

COVID-19 Health Check: Resco Inspection questionnaire template
This form enables users to easily self-check whether they exhibit symptoms that are commonly related to the coronavirus. And if that is the case, it can offer also further instructions on necessary actions. (COVID-19 Health Check.qbuilder)
Face Mask Check: AI image recognition model for Resco Inspections
This AI image recognition model enables users to confirm with a photo whether they are wearing a face mask or not before they can proceed with the job. (AI Face Mask Check.qbuilder)

Assign Inspector Role in MobileTech Admin

In MobileTech Admin, assign the Inspector role to the technicians who will be using Inspections (and the optional Job Safety Analysis).

Enable Inspections

Inspections are enabled if you have imported the MobileTech with Inspections project and you do not need to perform the following steps to enable Inspections and move Inspection icons.

The instructions are provided if you want to enable Inspections on the other non-Inspections MobileTech project available in the C:\Program Files (x86)\Signature\MobileTech\Admin\Woodford folder. After you've completed the following, you will also need to assign the Inspector Role in MobileTech Admin. (See above.)

Enable Inspections in the Woodford Project

In MobileTech Administration, select Tools > Launch Resco Cloud Dashboard.
Enter the Email and Password and select Log in.
In the left navigation, select Woodford.
Open the MobileTech Woodford project.
In the left navigation, scroll down to the Settings section.
Select Inspections.
Mark Enable Inspections.
In the Configure Inspections pop-up, verify that your company has the appropriate license.
Select Save from the menu bar.
From the menu bar, select Add to Home to add the Inspection icon to the Home navigation in MobileTech and then select OK.
From the menu bar, select Add to Form to add the Inspection icon to the bottom of the job appointment form in MobileTech.
1. In the Template drop-down, select Appointment [appointment] and select OK.
2. In the Select Form window, select Complete - Job Appointment and select OK.
From the menu bar, select Add to Form to add the Inspection icon to the bottom of the service appointment form in MobileTech.
1. In the Template drop-down, select Appointment [appointment] and select OK.
2. In the Select Form window, select Complete - Service Appointment and select OK.
From the menu bar, select Install Report to verify the Inspection Report is installed. If it isn't, you will install it now. Select OK.
If it is installed a "Report already present" pop-up window displays.
In the left navigation, under Entities, select resco_questionnaire (Inspection).
Mark the equipmentid checkbox and select Save from the menu bar.
Continue with the steps below.

Move the MobileTech Inspection Icons in the Woodford Project

When you add icons to MobileTech, the icons are added at the bottom of each of the lists. We recommend that you move these icons so that they display logically with the other icons.

Move Inspections icon on the Home screen

In the MobileTech Project, in the left navigation, locate the Components section.
Select Home Screen.
Under Menu items, locate and select Inspections | Questionnaire.
Drag-and-drop or use the Move Up button in the menu bar so that the selection is below newcall. This moves the Inspections icon in MobileTech to display after the New Call icon.
Select Save from the menu bar.

Move the Inspections icon on the Appointment Completion forms

In the left navigation, scroll down to Entities.
Select Appointment.
From the menu bar, select Show UI.
Select Complete - Job Appointment.
1. From the menu bar, select Edit.
2. Select Inspections ( * ) and then either drag-and-drop or use the Move Up button from the menu bar so that this is below locationcontact. This moves the Inspections icon in MobileTech to display to the right of the Contacts icon in the Job Appointment Completion form.
3. Select Save and Close.
Select Complete - Service Appointment.
1. Select Edit.
2. Select Inspections ( * ) and then either drag-and-drop or use the Move Up button from the menu bar so that this is below locationcontact. This moves the icon in MobileTech to display to the right of the Contacts icon in the Service Appointment Completion form.
3. Select Save and Close.
Publish the project.

Disable Resco Inspections

To remove Inspections, there are a few steps that you need to perform in the Woodford Project.

Remove the Inspections icon from the Home navigation

In MobileTech Administration, select Tools > Launch Resco Cloud Dashboard.
Enter the Email and Password and select Log in.
In the left navigation, select Woodford.
Open the MobileTech Woodford project.
In the left navigation, in the Components section, select Home screen.
Select Inspections | Questionnaire.
From the menu bar, select Remove.
Select Save.

Remove the Inspections icon from the Appointment Completion forms

While still in the MobileTech Woodford project, scroll down to Entities.
Select Appointments.
From the menu bar, select Show UI.
Select Complete - Job Appointment.
1. From the menu bar, select Edit.
2. Select Inspections ( * ).
3. From the menu bar, select Delete.
4. Select Save & Close.
Select Complete - Service Appointment.
1. From the menu bar, select Edit.
2. Select Inspections ( * ).
3. From the menu bar, select Delete.
4. Select Save & Close.
Continue with the step below.

Disable Inspections

While still in the MobileTech Woodford project, scroll down to Settings.
Select Inspections.
Clear the mark from the Enable Inspections check box.
Select Save.
Publish the project.

Disable Branch_inspection and Technician_team Entities

While still in the MobileTech Woodford project, scroll down to Entity.
Select Technician Team - Inspection.
From the menu bar, select Disable and then select Save.
From the left navigation under Entity, select Branch - Inspection.
From the menu bar, select Disable, and then select Save.

Related topics:

Browser not supported