• Installing the Connect User Interface (UI)
• Working with Users
• Working with Roles
• Creating an Agent
• Licensing the Mini Agent
• Simple Connect Mini Agent Deployment
• Assigning a Static IP Address to a Mini Agent
• Obtaining IP Information from a BAS Network

Anchor
files_installing_the_connect_use_6743 files_installing_the_connect_use_6743

Anchor
_Toc517869437 _Toc517869437

Installing the Connect User Interface (UI)

The following steps will facilitate installation of the Connect UI.

...

Remote tunneling

See [ Remote tunneling .
 

Anchor
files_

...

In some BAS networks, DHCP is not enabled and the Mini Agent will not be able to [ automatically be assigned an IP address . In this situation, a static IP address will need to be assigned to the Mini Agent.

1. Connect PC, phone or tablet to Connect Mini Agent Wi-Fi hotspot.
2. Enter the Wi-Fi password: c0nnecT7
3. Open Browser on device.
4. Go to 192.168.7.1:57000
5. Enter the password: c0nnecT7
6. Go to settings.
7. Enter the IP address, subnet mask, and default gateway found in [ Obtaining IP information from BAS network .

...

obtaining_ip_information_f_2701 files_obtaining_ip_information_f_2701

Anchor
_Toc517869453 _Toc517869453

Obtaining IP information from BAS Network

1. Plug the PC into the network drop for the Mini Agent.

2. Choose Check Network Status. 

   Expand
   title View image

   
   

3. The Connect server port is auto-selected. 

   Expand
   title View image

   
   

4. Choose Check Network Settings.

5. Note the statuses of each of the ports. An icon displays to the right of each Connect port. 

   Expand
   title View image

   
   

6. Verify the PC successfully obtained an IP address on the same subnet as the BAS. 

   Note
   title Note:
   If any of the ports cannot be accessed, or if an IP address was not successfully obtained, contact the system administrator to open the required ports and to reserve a static IP address.