- Installing the Connect User Interface (UI)
- Working with Users
- Working with Roles
- Creating an Agent
- Licensing the Mini Agent
- Simple Connect Mini Agent Deployment
- Assigning a Static IP Address to a Mini Agent
- Obtaining IP Information from a BAS Network
Installing the Connect User Interface (UI)
The following steps will facilitate installation of the Connect UI.
Download the Installing and Licensing the UI User r training guide. |
- To install the Connect UI, go to the following link - Connect 2018_Setup.
- A message displays asking, "What do you want to do with connect2018_setup.exe?" You can save the file to your computer and then double-click to run the file or choose Run to start the installation.
In the Welcome window, choose Install.
This will complete the Connect installation. Choose Finish.
- Launch Connect by double-clicking the Connect 2018 icon on the desktop.
The Connect login window displays.A license must be requested via an existing user with licensing authority. An email will be sent to the new user's email address containing a temporary password. The new user may then change the provided password.
- Open Connect after receiving the email.
Enter username and temporary password.
Remote tunneling
See [ Remote tunneling .
Assigning a static IP address to mini agent
In some BAS networks, DHCP is not enabled and the Mini Agent will not be able to [ automatically be assigned an IP address . In this situation, a static IP address will need to be assigned to the Mini Agent.
- Connect PC, phone or tablet to Connect Mini Agent Wi-Fi hotspot.
- Enter the Wi-Fi password: c0nnecT7
- Open Browser on device.
- Go to 192.168.7.1:57000
- Enter the password: c0nnecT7
- Go to settings.
- Enter the IP address, subnet mask, and default gateway found in [ Obtaining IP information from BAS network .
Obtaining IP information from BAS Network
- Plug the PC into the network drop for the Mini Agent.
Choose Check Network Status.
The Connect server port is auto-selected.
- Choose Check Network Settings.
Note the statuses of each of the ports. An icon displays to the right of each Connect port.
Verify the PC successfully obtained an IP address on the same subnet as the BAS.
Note:
If any of the ports cannot be accessed, or if an IP address was not successfully obtained, contact the system administrator to open the required ports and to reserve a static IP address.