Resco Inspections is designed to perform the entire inspection process and the ability to generate a report directly on a device, immediately after completing an inspection. You can customize the report directly in the Questionnaire Designer or Report Designer. For information about how to use Resco's Questionnaire Designer and Report Designer, go to https://docs.resco.net/wiki/Mobile_reports_for_Resco_Inspections.

Resco Inspections in is enabled in the MobileTech with Inspections project, however you will need to assign the Inspector Role to any technicians who will be using Inspections (and the optional Job Safety Analysis).  If you will be using the Job Safety Analysis, you will need to complete the steps to enable found here: Enable Job Safety Analysis (optional). Resco has a 30-day trial that you can use to evaluate Resco Inspections. After the trial, to purchase the Resco Inspections module for MobileTech, contact your Key2Act WennSoft Customer Success Manager. If you decide you do not want to purchase Resco Inspections, you will need to Disable Resco Inspections.

...

In MobileTech Admin, assign the Inspector role to the technicians who will be using Inspections (and the optional Job Safety Analysis).

Enable Inspections

Inspections are enabled if you have imported the MobileTech with Inspections project and you do not need to perform the following steps to enable Inspections and move Inspection icons. The  

The instructions are provided if you want to enable Inspections on the other non-Inspections MobileTech project available in the C:\Program Files (x86)\Signature\MobileTech\Admin\Woodford folder. After you've completed the following, you will also need to assign the Inspector Role in MobileTech Admin. (See above.)

...

1. In MobileTech Administration, select Tools > Launch Resco Cloud Dashboard. 
2. Enter the Email and Password and select Log in. 
3. In the left navigation, select Woodford.
4. Open the MobileTech Woodford project.
5. In the left navigation, scroll down to the Settings section.
6. Select Inspections.
7. Mark Enable Inspections.
8. In the Configure Inspections pop-up, verify that your company has the appropriate license.
9. Select Save from the menu bar.
10. From the menu bar, select Add to Home to add the Inspection icon to the Home navigation in MobileTech and then select OK.
11. From the menu bar, select Add to Form to add the Inspection icon to the bottom of the job appointment form in MobileTech.
    1. In the Template drop-down, select Appointment [appointment] and select OK.
    2. In the Select Form window, select Complete - Job Appointment and select OK.
12. From the menu bar, select Add to Form to add the Inspection icon to the bottom of the service appointment form in MobileTech.
    1. In the Template drop-down, select Appointment [appointment] and select OK.
    2. In the Select Form window, select Complete - Service Appointment and select OK.
13. From the menu bar, select Install Report to verify the Inspection Report is installed. If it isn't, you will install it now. Select OK.
    If it is installed a "Report already present" pop-up window displays.
14. In the left navigation, under Entities, select Inspections resco_questionnaire (Inspection).
15. Mark the Equipment equipmentid checkbox and select Save from the menu bar.
16. Continue with the steps below.

...