...

Resco Inspections is enabled in the MobileTech with Inspections project, however you will need to assign the Inspector Role to any technicians who will be using Inspections (and the optional Job Safety Analysis). If you will be using the Job Safety Analysis, you will need to complete the steps to enable found here: Enable Job Safety Analysis (optional). Resco has a 30-day trial that you can use to evaluate Resco Inspections. After the trial, to purchase the Resco Inspections module for MobileTech, contact your Key2Act WennSoft Customer Success Manager. If you decide you do not want to purchase Resco Inspections, you will need to Disable Resco Inspections.

...

In MobileTech Admin, assign the Inspector role to the technicians who will be using Inspections (and the optional Job Safety Analysis).

Enable

...

Inspections

...

Inspections are enabled if you have imported the MobileTech with Inspections project and you do not need to perform the following steps to enable Inspections and move Inspection icons. The  

The instructions are provided if you want to enable Inspections on the other non-Inspections MobileTech project available in the C:\Program Files (x86)\Signature\MobileTech\Admin\Woodford folder. After you've completed the following, you will also need to assign the Inspector Role in MobileTech Admin. (See above.)

...